我的机子是hpbl2.5p 四个网口 已经安装过psp包. .
我将eth0和et.h2做.了一个绑定，绑定的步骤如下：学习
To .configu.re two network devices for channel bonding, perform the follow.ing:.
1. Crea.te a bonding devices in /etc/modprobe.c.onf. For example:.
al.ias bond0 bonding--------------彩票
options. bond.ing miimon=100 mode=1.
2. This loads the bonding device. with the bond0 interface name, as well as passes options to the bonding driver t.o configure it .as an active-.backup master devic.e for the enslaved network interfaces. .
3. Edit the. /etc/sysconfi.g/network-scripts/ifcfg-ethX configuration file for both eth0 and eth1 so that the files show identical contents. Fo.r exampl.e: --------------彩票
DEVICE=ethX
USERCTL=no
ONBOOT=yes
MASTER=bond0
SLAVE=yes
BOOTPROTO=none
4. This will enslave ethX (replace X. with the assigned number of the. Ethernet devices) to the bond0 master device...
5. Create a network script. fo.r the bonding devi.ce .(for example, /etc/sysconfig/network-scripts/ifcfg-bond0), which would appear like the following example: 电子
DEVICE=bond0
USERCTL=no
ONBOOT=yes
BROAD.CAST=192.168.1.255.
N.ETWORK=192.168.1.0 婚庆
NET.MASK=255.255.255.0.
GATEWAY=192.1.68.1.1教育
I.PADDR=192.168.1.10--------------彩票
6. Reboo.t the system for the changes to t.ake effect服务器
昨天晚上网络还是好好的，今天早.上去网络就ping 不.通了( 游戏 )
运行一下ser.vice network res.tart 网络也不通了.
重起机器有时候网络也会不通
重.起机器的时候网络并没报什么错误，.bond0也是被激活了的 汽车
