[问题求助]双网卡问题。。。急 [复制链接]

我是打.算来做透明代理的。配置如下：INTE.LP4 3.0 。GIGABITY8I845G.M-RZ，ST80G，RTL8139D。做系统的时候是一块网卡。做完后.起了网络服务。一切OK。又插了一块同样的一块就不行。有MII-TOOL如下提示： eth0 no link.
et.h1 没有被配置。。。。我又把新插的那块拿了下来就又好了eth0: negotiat.ed 100baseTx-FD flow-control, link .ok           鲜花
晕呀。。。。

乱顺序了。你新插的网卡占据了ETH0。把2块网卡都插好，重新配置网络就可以了

我换了插槽。。ETH0是好了。但是请看：
[root@labserver root]# service network restart
Shutting down interface eth0:                              [  OK  ]
Shutting down loopback interface:                          [  OK  ]
Setting network parameters:                                [  OK  ]
Bringing up loopback interface:                            [  OK  ]
Bringing up interface eth0:                                [  OK  ]
Bringing up interface eth1:  Error for wireless request "Set Encode" (8B2A) :
    SET failed on device eth ; No such device.
Error for wireless request "Set ESSID" (8B1A) :
    SET failed on device eth ; No such device.
SIOCGIFFLAGS: No such device
Failed to bring up eth.
                                                           [FAILED]

ETH1是无线网卡。
贴出ETH1的设置。

ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:14:78:03:5B:C3
          inet addr:192.168.1.224  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:9228 errors:0 dropped:0 overruns:0 frame:0
          TX packets:479 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:574822 (561.3 Kb)  TX bytes:42915 (41.9 Kb)
          Interrupt:10 Base address:0xa000

eth1      Link encap:Ethernet  HWaddr 00:E0:4C:F2:1B:C8
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:11 Base address:0xc000

[root@labserver root]# lsmod
Module                  Size  Used by    Not tainted
8139too                18088   1
mii                     3976   0  [8139too]
keybdev                 2944   0  (unused)
mousedev                5492   0  (unused)
hid                    22148   0  (unused)
input                   5856   0  [keybdev mousedev hid]
usb-uhci               26348   0  (unused)
ehci-hcd               19976   0  (unused)
usbcore                78784   1  [hid usb-uhci ehci-hcd]
ext3                   70784   3
jbd                    51892   3  [ext3]

/etc/sysconfig/network-script/ifcfg-eth1
的结果呢。

[root@labserver root]# cat /etc/sysconfig/network-scripts/ifcfg-eth1
DEVICE=eth
ONBOOT=yes
BOOTPROTO=static
IPADDR=192.168.1.225
NETMASK=255.255.255.0
GATEWAY=192.168.1.1
[root@labserver root]#

DEVICE=eth   //为什么少了个1
ONBOOT=yes
BOOTPROTO=static
IPADDR=192.168.1.225
NETMASK=255.255.255.0
GATEWAY=192.168.1.1


另外再找找，怎么有无线的设置啊。

我试着该了一下DEVICE=eth1
结果是这样：
Shutting down interface eth0:                              [  OK  ]
Shutting down interface eth1:                              [  OK  ]
Shutting down loopback interface:                          [  OK  ]
Setting network parameters:                                [  OK  ]
Bringing up loopback interface:                            [  OK  ]
Bringing up interface eth0:                                [  OK  ]
Bringing up interface eth1:                                [  OK  ]
但是就没网了 。。PING 不通了