[问题求助][Ubuntu] 来个高手帮下忙被~~~~~~~~~~~~ [复制链接]

我刚装了UBUNT.U 想学习下。可是无法上网，提示找不到接口。而且猫上的 网口灯也不.亮.
怎么搞啊  来个 大佬教下被
搞了半天还是没反应.啊 ~~无语.了~~~~~~~~上个网咋这么难啊.

再XP下 一切正常~~.好好的 可以上网           鲜花
问题找到了~是8139网卡的事情~~设置了. XP关机.后 禁用网卡 所以 ............              乙肝
但是新问题油来了  还是没法.上网啊 .

Sep 17 07:25:41 zhang-desktop pppd[5430]: .Timeout wa.iting for PADO packets    美容
Sep 17 07:25:4.1 zha.ng-desktop pppd[5430]: Unable to complete PPPoE Discovery.电影
Sep 17 07:25:41 zhang-desk.top p.ppd[5430]: Connection terminated..
Sep 17 07:25:4.1 zhang-desktop pppd.[5430]: write: Bad file descriptor (9)电影
Sep 17 07:26:16 zh.ang-desktop pppd[5430]: Timeout waiting for PADO. packets.
Sep 17 07:26:.16 zhang-desktop .pppd[5430]: Unable to .complete PPPoE Discovery            杀毒
Sep 17 07:26:16 zhang-desktop pppd[543.0]: write:. Bad file descriptor (9)外贸
Sep 17 07:26:51 zhang-desktop pppd[5430].: Timeout waiting fo.r PADO packets[成人用品]
Sep 17 07:26:51 zhang-de.sktop pppd[5430]: Un.able to complete PPPoE Disc.overy电脑
Sep 17 07:26:51 zhang-desktop pppd[5430]: writ.e: .Bad file descriptor (9)健康


zhang@zhang-desktop:~.$ if.config    外汇
eth0      Link enca.p:以太网  硬件地址 00:e0:4.d:a8:ec:94  .
          UP BROAD.CAST RUNN.ING MULTICAST  MTU:1500  跃点数:1投资
          .接收数据包:99. 错误:0 丢弃:0 过载:0 帧数:0--- 印刷
          发送数..据包:130 错误:0 丢弃:0 过载:0 载波:0服务器
          碰撞:0 发.送队列长度:.1000 域名
     .     接收字节:15298 (1.4.9 KB)  发送字节:15385 (15.0 KB)             电子
.         中断:5 基本地址:0xac00. [成人用品]

eth0:avahi Link enc.ap.:以太网  硬件地址 00:e0:4d:a8:ec:94  --------------彩票
          inet 地址:169.254.10.7.  广播:169.254.255.255 . 掩码:255.255.0.0.
          UP BROADCAST RUNNING MULTICAST  M.TU:1500  跃点数:.1.
    .      中断:5 基本.地址:0xac00 .

lo       . Link. encap:本地环回  --------------彩票
          inet 地址:127.0.0.1  .掩码:2.55.0.0.0电脑
          inet6 地址.: ::1/128 Scope:.Host[成人用品]
.   .      UP LOOPBACK RUNNING  MTU:16436  跃点数:1学习
   .       接收数据包:.131257 错误:0 丢弃:0 过载:0 帧数:0.
         . 发送数据包:131257 错误:0 丢弃:0 过载:0 .载波:0电脑
          碰撞:0 .发送队列长度:0 <性病>
          接收字节:6598916 (6.2 MB)  发送字节:659.8916 (6.2 MB.)           鲜花

[ 本帖最后由 q1248.42746 于 2008-9-17 0.7:39 编辑 ]健康

网卡什么型号的？ 主板什么型号的？
如果可能，在linux下运行“lspci” “dmesg”  把输出的信息贴上来

lspci
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a4)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev b1)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a4)
00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f3)
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
04:00.0 VGA compatible controller: ATI Technologies Inc RV370 [Sapphire X550 Silent]
04:00.1 Display controller: ATI Technologies Inc RV370 secondary [Sapphire X550 Silent]

0000000000000000000000000000000000000000000000000000
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Aug 20 22:56:21 UTC 2008 (Ubuntu 2.6.24-19.41-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[    0.000000]  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[    0.000000]  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f3a40
[    0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   131056
[    0.000000]   HighMem    131056 ->   131056
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   131056
[    0.000000] On node 0 totalpages: 131056
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 991 pages used for memmap
[    0.000000]   Normal zone: 125969 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI not present or invalid.
[    0.000000] ACPI: RSDP signature @ 0xC00F7B80 checksum 0
[    0.000000] ACPI: RSDP 000F7B80, 0014 (r0 Nvidia)
[    0.000000] ACPI: RSDT 1FFF3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: FACP 1FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: DSDT 1FFF3180, 6436 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
[    0.000000] ACPI: FACS 1FFF0000, 0040
[    0.000000] ACPI: MCFG 1FFF96C0, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: APIC 1FFF9600, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: no DMI BIOS year, acpi=force is required to enable ACPI
[    0.000000] ACPI: Disabling ACPI support
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000]     Virtual Wire compatibility mode.
[    0.000000] OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
[    0.000000] Processor #0 15:12 APIC version 17
[    0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Processors: 1
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
[    0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130033
[    0.000000] Kernel command line: root=UUID=48CF-7853 loop=/ubuntu/disks/root.disk ro quiet splash
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Detected 1850.056 MHz processor.
[   26.931355] spurious 8259A interrupt: IRQ7.
[   26.932307] Console: colour VGA+ 80x25
[   26.932310] console [tty0] enabled
[   26.932544] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   26.932901] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   26.941935] Memory: 507260k/524224k available (2177k kernel code, 16328k reserved, 1006k data, 368k init, 0k highmem)
[   26.941943] virtual kernel memory layout:
[   26.941944]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   26.941945]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   26.941947]     vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
[   26.941948]     lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
[   26.941949]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)
[   26.941950]       .data : 0xc03204c4 - 0xc041bdc4   (1006 kB)
[   26.941951]       .text : 0xc0100000 - 0xc03204c4   (2177 kB)
[   26.941954] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   26.941984] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   27.021937] Calibrating delay using timer specific routine.. 3702.65 BogoMIPS (lpj=7405310)
[   27.021959] Security Framework initialized
[   27.021964] SELinux:  Disabled at boot.
[   27.021977] AppArmor: AppArmor initialized
[   27.021980] Failure registering capabilities with primary security module.
[   27.021988] Mount-cache hash table entries: 512
[   27.022082] Initializing cgroup subsys ns
[   27.022085] Initializing cgroup subsys cpuacct
[   27.022093] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 00000000
[   27.022101] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   27.022104] CPU: L2 Cache: 128K (64 bytes/line)
[   27.022106] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001 00000000
[   27.022114] Compat vDSO mapped to ffffe000.
[   27.022123] Checking 'hlt' instruction... OK.
[   27.038176] SMP alternatives: switching to UP code
[   27.039240] Freeing SMP alternatives: 11k freed
[   27.039353] Early unpacking initramfs... done
[   27.381046] CPU0: AMD Sempron(tm) Processor 3000+ stepping 02
[   27.381065] Total of 1 processors activated (3702.65 BogoMIPS).
[   27.381117] ExtINT not setup in hardware but reported by MP table
[   27.381206] ENABLING IO-APIC IRQs
[   27.381398] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[   27.421083] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[   27.421123] ...trying to set up timer (IRQ0) through the 8259A ...
[   27.421125] ..... (found pin 0) ...works.
[   27.673450] Brought up 1 CPUs
[   27.673483] CPU0 attaching sched-domain:
[   27.673485]  domain 0: span 01
[   27.673487]   groups: 01
[   27.673649] net_namespace: 64 bytes
[   27.673653] Booting paravirtualized kernel on bare hardware
[   27.674091] Time:  0:20:54  Date: 09/17/08
[   27.674116] NET: Registered protocol family 16
[   27.674286] EISA bus registered
[   27.679140] PCI: PCI BIOS revision 3.00 entry at 0xfa7d0, last bus=4
[   27.679142] PCI: Using configuration type 1
[   27.679144] Setting up standard PCI resources
[   27.681355] ACPI: Interpreter disabled.
[   27.681359] Linux Plug and Play Support v0.97 (c) Adam Belay
[   27.681384] pnp: PnP ACPI: disabled
[   27.681386] PnPBIOS: Scanning system for PnP BIOS support...
[   27.681595] PnPBIOS: Found PnP BIOS installation structure at 0xc00fb340
[   27.681601] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb370, dseg 0xf0000
[   27.682410] PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
[   27.682594] PCI: Probing PCI hardware
[   27.682596] PCI: Probing PCI hardware (bus 00)
[   27.683016] PCI: Transparent bridge - 0000:00:09.0
[   27.684195] PCI->APIC IRQ transform: 0000:00:01.1[A] -> IRQ 3
[   27.684198] PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 5
[   27.684201] PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 10
[   27.684203] PCI->APIC IRQ transform: 0000:00:04.0[A] -> IRQ 3
[   27.684206] PCI->APIC IRQ transform: 0000:00:07.0[A] -> IRQ 10
[   27.684209] PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 11
[   27.684214] PCI->APIC IRQ transform: 0000:01:05.0[A] -> IRQ 5
[   27.684217] PCI->APIC IRQ transform: 0000:04:00.0[A] -> IRQ 5
[   27.737420] NET: Registered protocol family 8
[   27.737423] NET: Registered protocol family 20
[   27.737493] AppArmor: AppArmor Filesystem Enabled
[   27.737530] system 00:07: iomem range 0x0-0x9ffff could not be reserved
[   27.737533] system 00:07: iomem range 0xfffe0000-0xffffffff could not be reserved
[   27.737536] system 00:07: iomem range 0xfec00000-0xfec0ffff could not be reserved
[   27.737539] system 00:07: iomem range 0xfee00000-0xfeefffff could not be reserved
[   27.737542] system 00:07: iomem range 0xfefffc00-0xfeffffff could not be reserved
[   27.737545] system 00:07: iomem range 0x100000-0xffffff could not be reserved
[   27.737551] system 00:08: iomem range 0xf0000-0xf3fff could not be reserved
[   27.737554] system 00:08: iomem range 0xf4000-0xf7fff could not be reserved
[   27.737557] system 00:08: iomem range 0xf8000-0xfffff could not be reserved
[   27.737560] system 00:08: iomem range 0xcd000-0xcffff has been reserved
[   27.737898] PCI: Bridge: 0000:00:09.0
[   27.737901]   IO window: a000-afff
[   27.737905]   MEM window: fde00000-fdefffff
[   27.737907]   PREFETCH window: fdf00000-fdffffff
[   27.737910] PCI: Bridge: 0000:00:0c.0
[   27.737912]   IO window: 9000-9fff
[   27.737914]   MEM window: fdd00000-fddfffff
[   27.737917]   PREFETCH window: fdc00000-fdcfffff
[   27.737919] PCI: Bridge: 0000:00:0d.0
[   27.737921]   IO window: 8000-8fff
[   27.737924]   MEM window: fdb00000-fdbfffff
[   27.737926]   PREFETCH window: fda00000-fdafffff
[   27.737931] PCI: Bridge: 0000:00:0e.0
[   27.737933]   IO window: 7000-7fff
[   27.737935]   MEM window: fd900000-fd9fffff
[   27.737938]   PREFETCH window: d8000000-dfffffff
[   27.737945] PCI: Setting latency timer of device 0000:00:09.0 to 64
[   27.737952] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   27.737957] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   27.737963] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   27.737973] NET: Registered protocol family 2
[   27.741356] Time: tsc clocksource has been installed.
[   27.773404] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   27.773611] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[   27.773704] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[   27.773815] TCP: Hash tables configured (established 16384 bind 16384)
[   27.773818] TCP reno registered
[   27.785452] checking if image is initramfs... it is
[   28.447986] Freeing initrd memory: 7694k freed
[   28.448520] audit: initializing netlink socket (disabled)
[   28.448532] audit(1221610854.364:1): initialized
[   28.450177] VFS: Disk quotas dquot_6.5.1
[   28.450250] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   28.450425] io scheduler noop registered
[   28.450428] io scheduler anticipatory registered
[   28.450430] io scheduler deadline registered
[   28.450440] io scheduler cfq registered (default)
[   28.450457] pci 0000:00:00.0: Enabling HT MSI Mapping
[   36.466135] 0000:00:02.1 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
[   36.466170] pci 0000:00:0c.0: Enabling HT MSI Mapping
[   36.466177] PCI: Found enabled HT MSI Mapping on 0000:00:0c.0
[   36.466185] pci 0000:00:0d.0: Enabling HT MSI Mapping
[   36.466191] PCI: Found enabled HT MSI Mapping on 0000:00:0d.0
[   36.466200] pci 0000:00:0e.0: Enabling HT MSI Mapping
[   36.466206] PCI: Found enabled HT MSI Mapping on 0000:00:0e.0
[   36.466212] Boot video device is 0000:04:00.0
[   36.466335] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   36.466355] assign_interrupt_mode Found MSI capability
[   36.466373] Allocate Port Service[0000:00:0c.0:pcie00]
[   36.466429] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   36.466448]

assign_interrupt_mode Found MSI capability
[   36.466461] Allocate Port Service[0000:00:0d.0:pcie00]
[   36.466512] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   36.466530] assign_interrupt_mode Found MSI capability
[   36.466543] Allocate Port Service[0000:00:0e.0:pcie00]
[   36.466689] isapnp: Scanning for PnP cards...
[   36.819068] isapnp: No Plug & Play device found
[   36.847646] Real Time Clock Driver v1.12ac
[   36.847709] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   36.847809] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   36.847962] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   36.848474] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   36.849176] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   36.849240] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   36.849331] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[   36.851781] serio: i8042 KBD port at 0x60,0x64 irq 1
[   36.851786] serio: i8042 AUX port at 0x60,0x64 irq 12
[   36.857937] mice: PS/2 mouse device common for all mice
[   36.858047] EISA: Probing bus 0 at eisa.0
[   36.858052] Cannot allocate resource for EISA slot 1
[   36.858066] Cannot allocate resource for EISA slot 7
[   36.858068] Cannot allocate resource for EISA slot 8
[   36.858070] EISA: Detected 0 cards.
[   36.858073] cpuidle: using governor ladder
[   36.858075] cpuidle: using governor menu
[   36.858154] NET: Registered protocol family 1
[   36.858177] Using IPI No-Shortcut mode
[   36.858205] registered taskstats version 1
[   36.858283]   Magic number: 8:562:304
[   36.858381]   hash matches device tty33
[   36.858398] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   36.858400] EDD information not available.
[   36.858676] Freeing unused kernel memory: 368k freed
[   36.885805] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   38.094546] fuse init (API version 7.9)
[   38.125465] thermal: Unknown symbol acpi_processor_set_thermal_limit
[   38.369203] usbcore: registered new interface driver usbfs
[   38.369226] usbcore: registered new interface driver hub
[   38.386174] usbcore: registered new device driver usb
[   38.405115] SCSI subsystem initialized
[   38.420588] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   38.420641] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   38.420644] ohci_hcd 0000:00:02.0: OHCI Host Controller
[   38.420825] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[   38.420842] ohci_hcd 0000:00:02.0: irq 5, io mem 0xfe02f000
[   38.456795] libata version 3.00 loaded.
[   38.463673] 8139too Fast Ethernet driver 0.9.28
[   38.478598] usb usb1: configuration #1 chosen from 1 choice
[   38.478621] hub 1-0:1.0: USB hub found
[   38.478628] hub 1-0:1.0: 10 ports detected
[   38.580603] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   38.580608] ehci_hcd 0000:00:02.1: EHCI Host Controller
[   38.580641] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[   38.580669] ehci_hcd 0000:00:02.1: debug port 1
[   38.580672] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[   38.580683] ehci_hcd 0000:00:02.1: irq 10, io mem 0xfe02e000
[   38.592409] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   38.592520] usb usb2: configuration #1 chosen from 1 choice
[   38.592542] hub 2-0:1.0: USB hub found
[   38.592551] hub 2-0:1.0: 10 ports detected
[   38.696974] eth0: RealTek RTL8139 at 0xac00, 00:e0:4d:a8:ec:94, IRQ 5
[   38.696978] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[   38.698626] pata_amd 0000:00:06.0: version 0.3.10
[   38.698672] PCI: Setting latency timer of device 0000:00:06.0 to 64
[   38.704508] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   38.712284] scsi0 : pata_amd
[   38.720960] scsi1 : pata_amd
[   38.721007] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe800 irq 14
[   38.721010] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe808 irq 15
[   38.744138] FDC 0 is a post-1991 82077
[   38.884601] ata1.00: ATA-7: SAMSUNG SP0822N, WA100-31, max UDMA/100
[   38.884606] ata1.00: 156368016 sectors, multi 16: LBA48
[   38.884619] ata1.00: limited to UDMA/33 due to 40-wire cable
[   38.900475] ata1.00: configured for UDMA/33
[   38.980115] usb 2-6: new high speed USB device using ehci_hcd and address 2
[   39.113820] usb 2-6: configuration #1 chosen from 1 choice
[   39.220118] ata2.00: ATAPI: SAMSUNG CD-ROM  SC-152L, C101, max MWDMA2
[   39.269283] usbcore: registered new interface driver libusual
[   39.274279] Initializing USB Mass Storage driver...
[   39.275446] scsi2 : SCSI emulation for USB Mass Storage devices
[   39.276373] usbcore: registered new interface driver usb-storage
[   39.276379] USB Mass Storage support registered.
[   39.276462] usb-storage: device found at 2
[   39.276464] usb-storage: waiting for device to settle before scanning
[   39.383929] ata2.00: configured for MWDMA2
[   39.384032] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SP0822N  WA10 PQ: 0 ANSI: 5
[   39.384615] scsi 1:0:0:0: CD-ROM            SAMSUNG  CD-ROM SC-152L   C101 PQ: 0 ANSI: 5
[   39.387243] sata_nv 0000:00:07.0: version 3.5
[   39.387256] sata_nv 0000:00:07.0: Using ADMA mode
[   39.387295] PCI: Setting latency timer of device 0000:00:07.0 to 64
[   39.388915] scsi3 : sata_nv
[   39.389243] scsi4 : sata_nv
[   39.389282] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 10
[   39.389285] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 10
[   39.699469] ata3: SATA link down (SStatus 0 SControl 300)
[   40.011211] ata4: SATA link down (SStatus 0 SControl 300)
[   40.011260] sata_nv 0000:00:08.0: Using ADMA mode
[   40.011301] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   40.011415] scsi5 : sata_nv
[   40.011701] scsi6 : sata_nv
[   40.011738] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc000 irq 11
[   40.011741] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc008 irq 11
[   40.322952] ata5: SATA link down (SStatus 0 SControl 300)
[   40.634694] ata6: SATA link down (SStatus 0 SControl 300)
[   40.655201] Driver 'sd' needs updating - please use bus_type methods
[   40.655277] sd 0:0:0:0: [sda] 156368016 512-byte hardware sectors (80060 MB)
[   40.655288] sd 0:0:0:0: [sda] Write Protect is off
[   40.655291] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   40.655305] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   40.655349] sd 0:0:0:0: [sda] 156368016 512-byte hardware sectors (80060 MB)
[   40.655357] sd 0:0:0:0: [sda] Write Protect is off
[   40.655360] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   40.655372] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   40.655376]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[   40.663997]  sda1 sda2 < sda5 sda6 sda7 >
[   40.708648] sd 0:0:0:0: [sda] Attached SCSI disk
[   40.715500] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   40.715518] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   40.716322] sr0: scsi3-mmc drive: 1x/52x cd/rw xa/form2 cdda tray
[   40.716328] Uniform CD-ROM driver Revision: 3.20
[   40.716376] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   41.476433] loop: module loaded
[   41.497755] kjournald starting.  Commit interval 5 seconds
[   41.497771] EXT3-fs: mounted filesystem with ordered data mode.
[   44.271813] usb-storage: device scan complete
[   44.273174] scsi 2:0:0:0: Direct-Access     Ut165    USB2FlashStorage 0.00 PQ: 0 ANSI: 2
[   44.276913] sd 2:0:0:0: [sdb] 8110080 512-byte hardware sectors (4152 MB)
[   44.279794] sd 2:0:0:0: [sdb] Write Protect is off
[   44.279799] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
[   44.279802] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   44.289902] sd 2:0:0:0: [sdb] 8110080 512-byte hardware sectors (4152 MB)
[   44.292762] sd 2:0:0:0: [sdb] Write Protect is off
[   44.292765] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
[   44.292767] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   44.292771]  sdb: unknown partition table
[   44.414835] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[   44.414871] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   50.350730] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   50.508063] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   50.554593] i2c-adapter i2c-0: nForce2 SMBus adapter at 0xf800
[   50.554609] i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf400
[   50.630562] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   51.345508] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[   51.355826] parport_pc 00:0d: reported by Plug and Play BIOS
[   51.355871] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   51.413813] irda_init()
[   51.413833] NET: Registered protocol family 23
[   51.456549] Linux agpgart interface v0.102
[   51.865784] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   52.189191] intel8x0_measure_ac97_clock: measured 54813 usecs
[   52.189195] intel8x0: clocking to 46983
[   54.152481] lp0: using parport0 (interrupt-driven).
[   54.700048] EXT3 FS on loop0, internal journal
[   55.302587] kjournald starting.  Commit interval 5 seconds
[   55.302616] EXT3 FS on loop1, internal journal
[   55.302620] EXT3-fs: mounted filesystem with ordered data mode.
[   57.124192] Adding 976552k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:976552k
[   59.909157] ip_tables: (C) 2000-2006 Netfilter Core Team
[   59.964000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[   60.243776] PPP generic driver version 2.4.2
[   60.291091] NET: Registered protocol family 17
[   60.340018] NET: Registered protocol family 10
[   60.340223] lo: Disabled Privacy Extensions
[   61.014772] powernow_k8: Unknown symbol acpi_processor_notify_smm
[   61.014822] powernow_k8: Unknown symbol acpi_processor_unregister_performance
[   61.014908] powernow_k8: Unknown symbol acpi_processor_register_performance
[   61.053156] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm
[   61.053205] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance
[   61.053346] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance
[   61.053414] acpi_cpufreq: Unknown symbol acpi_processor_register_performance
[   61.860943] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[   62.037256] ppdev: user-space parallel port driver
[   62.234612] audit(1221582089.188:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4530 profile="/usr/sbin/cupsd" namespace="default"
[   63.312181] Bluetooth: Core ver 2.11
[   63.312777] NET: Registered protocol family 31
[   63.312782] Bluetooth: HCI device and connection manager initialized
[   63.312786] Bluetooth: HCI socket layer initialized
[   63.350444] Bluetooth: L2CAP ver 2.9
[   63.350450] Bluetooth: L2CAP socket layer initialized
[   63.443112] Bluetooth: RFCOMM socket layer initialized
[   63.443345] Bluetooth: RFCOMM TTY layer initialized
[   63.443350] Bluetooth: RFCOMM ver 1.8
[   65.447634] [drm] Initialized drm 1.1.0 20060810
[   65.470219] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   65.470301] [drm] Initialized radeon 1.28.0 20060524 on minor 0
[   67.388832] [drm] Setting GART location based on new memory map
[   67.389035] [drm] Loading R300 Microcode
[   67.389060] [drm] writeback test succeeded in 1 usecs
[   71.868840] NETDEV WATCHDOG: eth0: transmit timed out
[   74.866376] eth0: Transmit timeout, status 0d 0000 c07f media 10.
[   74.866382] eth0: Tx queue start entry 4  dirty entry 0.
[   74.866385] eth0:  Tx descriptor 0 is 0008205a. (queue head)
[   74.866388] eth0:  Tx descriptor 1 is 0008203c.
[   74.866391] eth0:  Tx descriptor 2 is 0008203c.
[   74.866393] eth0:  Tx descriptor 3 is 0008204e.
[   74.866407] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[   83.858927] NETDEV WATCHDOG: eth0: transmit timed out
[   86.856475] eth0: Transmit timeout, status 0d 0000 c07f media 10.
[   86.856482] eth0: Tx queue start entry 4  dirty entry 0.
[   86.856485] eth0:  Tx descriptor 0 is 00082046. (queue head)
[   86.856488] eth0:  Tx descriptor 1 is 0008203c.
[   86.856490] eth0:  Tx descriptor 2 is 0008203c.
[   86.856493] eth0:  Tx descriptor 3 is 00082156.
[   86.856507] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[   95.849011] NETDEV WATCHDOG: eth0: transmit timed out
[   98.846552] eth0: Transmit timeout, status 0d 0000 c07f media 10.
[   98.846558] eth0: Tx queue start entry 4  dirty entry 0.
[   98.846562] eth0:  Tx descriptor 0 is 0008203c. (queue head)
[   98.846565] eth0:  Tx descriptor 1 is 0008203c.
[   98.846567] eth0:  Tx descriptor 2 is 00082156.
[   98.846570] eth0:  Tx descriptor 3 is 00082156.
[   98.846584] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[  113.834150] NETDEV WATCHDOG: eth0: transmit timed out
[  116.831672] eth0: Transmit timeout, status 0d 0000 c07f media 10.
[  116.831679] eth0: Tx queue start entry 4  dirty entry 0.
[  116.831682] eth0:  Tx descriptor 0 is 00082156. (queue head)
[  116.831685] eth0:  Tx descriptor 1 is 0008203c.
[  116.831687] eth0:  Tx descriptor 2 is 0008203c.
[  116.831690] eth0:  Tx descriptor 3 is 0008203c.
[  116.831704] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[  125.824229] NETDEV WATCHDOG: eth0: transmit timed out
[  128.821770] eth0: Transmit timeout, status 0d 0000 c07f media 10.
[  128.821776] eth0: Tx queue start entry 4  dirty entry 0.
[  128.821780] eth0:  Tx descriptor 0 is 0008203c. (queue head)
[  128.821783] eth0:  Tx descriptor 1 is 0008203c.
[  128.821785] eth0:  Tx descriptor 2 is 00082052.
[  128.821788] eth0:  Tx descriptor 3 is 000820fe.
[  128.821802] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[  137.814329] NETDEV WATCHDOG: eth0: transmit timed out
[  140.811863] eth0: Transmit timeout, status 0d 0000 c07f media 10.
[  140.811870] eth0: Tx queue start entry 4  dirty entry 0.
[  140.811873] eth0:  Tx descriptor 0 is 000820a2. (queue head)
[  140.811876] eth0:  Tx descriptor 1 is 000820fe.
[  140.811879] eth0:  Tx descriptor 2 is 000820fe.
[  140.811881] eth0:  Tx descriptor 3 is 00082060.
[  140.811895] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1

网卡是8139的， 最普通的， 应该绝对支持的！
看/etc/modules.conf里， 有没有eth0

ifconfig 一下， 看本地连接有无

最好确保你的猫100%正常

配置一下你的eth0接口，给个地址什么的。
cat /etc/network/interfaces
复制代码看看结果

[ 本帖最后由 零二年的夏天 于 2008-9-17 08:13 编辑 ]

cat /etc/network/interfaces





auto lo
iface lo inet loopback


auto dsl-provider
iface dsl-provider inet ppp
pre-up /sbin/ifconfig eth0 up # line maintained by pppoeconf
provider dsl-provider

iface ppp0 inet ppp
provider ppp0

auto ppp0