[问题求助]cygwin下安装交叉编译工具问题:bash:$'r':command not found [复制链接]

cygwin下安装交叉编译工具链时出现问题:bash'r':command not foundhttp://upload.bbs.csuboy.com/Mon_1004/126_7116_00bc4ff17adaaa0.gif[/img]           鲜花
请问该怎么解决?谢谢!

找一下$'r' 这个变量是想赋什么值?
应该是$r吧?

设了一个r变量, 引用$'r' . 估计是这种情况.

[ 本帖最后由 yidou 于 2009-3-23 11:47 编辑 ]

楼上可以说的详细点吗?我是初学这个,不是很懂,谢谢.
以下是详细错误

    $ source armtools-linux/cross-install.sh
    bash: $'r':command not found
    cd /
    tar: / \'r':cannot chdir:no such file or directory
    tar: Error is not recoverable:exiting now
    tar: / \'r':cannot chdir:no such file or directory
    tar: Error is not recoverable:exiting now
    tar: / \'r':cannot chdir:no such file or directory
    tar: Error is not recoverable:exiting now
    tar: / \'r':cannot chdir:no such file or directory
    tar: Error is not recoverable:exiting now
    cd  /tmp

armtools-linux/cross-install.sh
贴出来看看

这是cross-install.sh里面内容:

#!/bin/sh
# cross-install.sh

TMP=$PWD
echo cd /
tar -xvzf /tmp/armtools-linux/arm-linux-gcc-cygwin-2.95.3.tgz -C /
tar -xvzf /tmp/armtools-linux/arm-linux-binutils-cygwin-2.9.5.0.37.tgz -C /
tar -xvzf /tmp/armtools-linux/libc6-arm-cross-2.1.3-19.tgz -C /
tar -xvzf /tmp/armtools-linux/libc6-dev-arm-cross-2.1.3-19.tgz -C /
echo cd $TMP

楼上,我现在自己手动解压里面文件.将 cross-install.sh内容改成:

#!/bin/sh
# cross-install.sh

TMP=$PWD
echo cd /

echo cd $TMP

然后执行命令:
    
    $ source armtools-linux/cross-install.sh
    bash: $'r':command not found
    cd /
    bash: $'r':command not found
    cd  /tmp

仍然有这些错误,该怎么办?
谢谢!

把这个armtools-linux/cross-install.sh也贴出来吧

这是cross-install.sh里面内容:


#!/bin/sh
# cross-install.sh

TMP=$PWD
echo cd /
tar -xvzf /tmp/armtools-linux/arm-linux-gcc-cygwin-2.95.3.tgz -C /
tar -xvzf /tmp/armtools-linux/arm-linux-binutils-cygwin-2.9.5.0.37.tgz -C /
tar -xvzf /tmp/armtools-linux/libc6-arm-cross-2.1.3-19.tgz -C /
tar -xvzf /tmp/armtools-linux/libc6-dev-arm-cross-2.1.3-19.tgz -C /
echo cd $TMP