[问题求助]取消双网卡bond，每次重启都需要ifup 网卡，why？ [复制链接]

以前做了双网卡绑定，现在取消之.后，每次重启之后都需要.ifup一下网卡，不知是那里没有设置？.

more ifcfg-e.th0             电子
# Intel Corp.|82545E.M Gigabit Ethernet Controller (C.opper).
DEVICE=eth0
BOOTPROTO=none
BROA.DCAST=202.196.32.255    外汇
HWADDR=00:0C:7.6:4E:37:87(广告)
IPADDR=202.1.96.32.44投资
NETMASK=25.5.255.255.0.
NETWORK.=202.196.32.0服务器
ONBOOT=yes
TYPE=Ethernet
USERCTL=no
PEERDNS=no
GATEWAY=202..196.32.254电影

more ifcfg-eth.1              乙肝
# .Intel Corp.|82540EM Gigabit Eth.ernet Controller域名
DEVICE=eth1
BOOTPROTO=none
BROADCAST=202.196.32.25.5            杀毒
HWADDR=00:0C.:76:4E:37:86(广告)
I.PADDR=202.196.32.44[成人用品]
NETMASK=.255.255.255.0.
NETWO.RK=202.196.32.0健康
ONBOOT=yes
TYPE=Ethernet
USERCTL=no
PEERDNS=no
GATEWAY=202..196.32.254虚拟主机

more mes.sages |grep eth0           女人
May 26 11:10:57 ftp kernel: eth.0: Intel(R). PRO/1000 Network Connection.
May 26 11:10:.57 ftp kernel: eth0: Intel(R) PRO/1000 Network Connectio.n              乙肝
May 26 11:10.:57 ftp kernel: e.1000: eth0 NIC Lin.k is Up 1000 Mbps Full Duplex虚拟主机
May 26 11:11:00 ftp kernel.: bond0: enslaving eth0 as a.n active interface. with a down link.
May 2.6 11:11:03 .ftp kernel: e1000: eth0 NIC Link is Up 1000 Mbps Full D.uplex电脑
May 26 11:.11:03 ftp ke.rnel: bond0: link status d.efinitely up for interface eth0.              乙肝
May 26 14:52:02 ftp kernel: eth0: Intel(R) PRO/1000 Ne.two.rk Connection--- 印刷
May 26 14:52:02 ftp kernel: eth0.: Int.el(R) PRO/1000 Network Connection(广告)
May 26 14:52:02 ftp kernel: e100.0: eth0 .NIC Link is U.p 1000 Mbps Full Duplex.
May 27 15:19:21. ftp kernel: eth0: Intel(R) PRO/1000 Network Connection..
May 27 15:19:21 ftp ke.rnel: eth0: .Intel(R) PRO/1000 Network Connection    健康
May .27 15:.19:21 ftp kernel: e10.00: eth0 NIC Link is Up 1000 Mbps Full Duplex电脑

另外：
more mess.ages |grep net.work              乙肝
没有找到！

小弟求救！

把关于bond的信息在 /etc/modules.conf 里注释掉试试。

$more modules.conf

alias eth0 e1000
alias eth1 e1000
alias scsi_hostadapter aic79xx
alias scsi_hostadapter1 dpt_i2o
alias usb-controller usb-uhci
#alias bond0 bonding
#options bond0 miimon=100 mode=3

$ more /etc/rc.d/rc.local
#!/bin/sh
#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.

touch /var/lock/subsys/local

#ifenslave bond0 eth0 eth1
#route add -net 202.196.32.0 netmask 255.255.255.0 bond0
#route add default gw 202.196.32.254 bond0

设置如上所述，还是不行！