[问题求助]服务器双网卡问题...很奇怪.... [复制链接]

主机配置是双e1000网卡.系统使用的是.rha.s4 up4 .
eth0 配置了ip 192.168..1.32.
e.th1 配置了ip 192.168.1.31健康
网卡都正常启动
[root@XX ~]# ifconf.ig.
et.h0      Link encap:Ethernet  HWaddr 00:3.0:48:5F:18:E8(        游戏          )
          inet addr:192.168.1.32  .Bcast:192.168.1.255  Mask:25.5.255.255.0    健康
     .     inet6 addr: fe80::230:48ff:f.e5f:18e8/64 Scope:Link    外汇
          UP BROADCAST RU.NNING MULTICAST  MTU:1500  Metric:1.域名
  .        RX packets:45362 errors:0 dropped:0 .overruns:0 frame:0服务器
          TX pa.ckets:59659 error.s:0 dropped:0 overruns:0 carrier:0             汽车
.         collisions:0 txqueuelen:10.0          婚庆
          RX bytes:47663746 .(45.4 MiB)  .TX bytes:4681392 (4.4 MiB).
        .  Base address:0x200.0 Memory:df200000-df220000    外汇

eth1      Link encap:Ethe.rnet  HWaddr 00:30:48:5F:.18:E9外贸
          inet addr:.192.168.1.31  Bcast:192.168..1.255  Mask:255.255.255.0学习
          inet6 addr: .fe80::230:48ff:fe5f:18e9/64. Scope:Link.
          UP BROADCAST RUNNING .MUL.TICAST  MTU:1500  Metric:1.
       .   RX packets:90037 errors:0 dropped:0 overrun.s:0 frame:0.
     .     TX packets:22 er.rors:0 dropped:0 overruns:0 carrier:0          婚庆
          colli.sions:0 txqueue.len:100投资
          RX bytes:110600720. (105.4 MiB)  TX bytes:1486 (1.4 Ki.B)学习
          Base address:.0x2020 Memory:df220.000-df240000电脑

现在有一个这样的问题.我把连接eth0的网线.断开.pingeth1配.置的ip不通健康
我把eth1的网线断开pi.ng192..168.1.31和32都可以通[成人用品]
我在其他的服务器上使用arping .192.168.1.31 /32 的.时候发现,虚拟主机
返回的mac地址第一.个有时候是eth0.那张网卡的mac有时候是eth1的mac.
[root@其他服务器 ~.]# arping 19.2.168.1.31.
ARPING 192..168.1.31 from 192.168.1.203 .eth0[成人用品]
Unicast reply from. 192.168.1.31 [00:30:48:5F:18:E8.]  0.695ms.
Unicast reply from 192.168.1.31 [00:30:48:5F:1.8:E9]  0.726ms..
Unicast reply .from 192.168.1.31 [00:30:48:5F:.18:E9]  0.755ms教育
Sen.t 2 p.robes (1 broadcast(s))           女人
Received 3 resp.onse(s)           建材
[root@其他服.务器 ~]# arping 192.1.68.1.32           女人
AR.PING 192.168.1.32 from. 192.168.1.203 eth0              乙肝
Unicast reply from. 192.168.1.32 [00:30:48:5F.:18:E8]  0.656ms--- 印刷
Unicast reply from 192.168.1.3.2 [00:30:48:5F:18:E9]  0..772ms服务器
Unicast reply. from 192.168..1.32 [00:30:48:5F:18:E9]  0.719ms--- 印刷
Sen.t 2 p.robes (1 broadcast(s))           鲜花
Received 3 resp.onse(s)虚拟主机
但是有时候我在ar.ping .192.168.1.32/31时候返回的第一个mac又不样了              乙肝
[.root@其他服务器  ~]# arping 192..168.1.32.
AR.PING 192.168.1.32 from 192.168.1.2.03 eth0(广告)
Unicast re.ply from 192.168.1.32 [00:30:48:5F:.18:E9]  0.658ms            杀毒
Un.icast reply from 192..168.1.32 [00:30:48:5F:18:E8]  0.776ms    外汇
Unicast reply from 192.168.1..32 [00:30:48:5F:1.8:E8]  0.708ms            杀毒
Un.icast reply from 192.168..1.32 [00:30:48:5F:18:E8]  0.771ms(        游戏          )
Sent 3 p.robes (1 broadcas.t(s))           女人
觉得和奇怪.是我的网卡问题.还是其他配置的问题.服务器是新安装的.新购买的.如果是硬件问题请指教....
dmesg
Linux versio.n 2.6..9-42.ELsmp (bhcompile@hs20-bc1-1.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-2)) #1 SMP Wed Jul 12 23:27:17 E.DT 2006..
BIOS-provid.ed ph.ysical RAM map:             汽车
BIOS-e820: 0000000000000.000 - 00000000.0009e000 (usable)           女人
BIOS-e820: 0000.000000.09e000 - 00000000000a0000 (reserved)投资
BIOS-e820: 0.0000000000e4000 - 00000.00000100000 (reserved).
BIOS-e820: 0000000.000100000 - 00000000cff60000 (usable.)--- 印刷
BIOS-.e820: 00000000cff60.000 - 00000000cff69000 (ACPI data)              乙肝
BIOS-e820.: 000000.00cff69000 - 00000000cff80000 (ACPI NVS).
BIOS-e820: 00.000000cff80000 - 00000000d0000000 (re.served).
BIOS-e820: 00000000e0000000 - .00000000f0000000 (reserv.ed)(        游戏          )
BIOS-e820: 00000000fe.c00000 - 00000000fec10000 (res.erved)           建材
BIOS-e.820.: 00000000fee00000 - 00000000fee01000 (reserved)    外汇
BIOS-e820: 00000000ff000.000 - 000000010000000.0 (reserved)电脑
BIOS-e820: 0000.000100000000 - 000000023.0000000 (usable)           女人
8064MB HI.GHMEM available..
896MB LOWMEM a.vailable..
f.ound SMP MP-table. at 000f62c0服务器
NX (Execute Disable). protection: ac.tive           女人
On node 0 totalpage.s: 229376.0.
  DMA zone.: .4096 pages, LIFO batch:1.
  No.rmal. zone: 225280 pages, LIFO batch:16.
  Hi.ghMem zone: 206438.4 pages, LIFO batch:16    外汇
DMI present.
Usin.g APIC driver default[成人用品]
ACPI: RSDP (v000 PTLTD    .                         .    ) @ 0x000f6290<性病>
ACPI: RSDT (v001 PTLTD    R.SDT .  0x06040000  LTP 0x00000000) @ 0xcff64266.
ACPI: FADT (v001 INTEL  TUMWATER 0x0604000.0 PTL  0x00000003). @ 0xcff68e10健康
A.CPI: M.ADT (v001 PTLTD           APIC.   0x06040000  LTP 0x00000000) @ 0xcff68e84.
ACPI: MCFG (v001 PTLT.D    MCFG   0x0.6040000  LTP 0x00000000) @ 0xcff68f4c教育
ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP .0x0.0000001) @ 0xcff68f88           鲜花
ACPI: SPCR (v001 PTLTD  $UCRTBL$ 0.x06040000 PTL  0x000000.01) @ 0xcff68fb0.
ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x2005022 @ 0xcff642a2http://upload.bbs.csuboy.com/Mon_1004/126_6973_31ffde71d54d97a.gif[/img]
ACPI: DSDT (v001  Intel BLAKFORD 0x06040.000 MSFT 0x0100000e) @ 0x0000000.0域名
ACPI: PM.-Timer IO Port: 0x10.08    外汇
ACPI: Local APIC address. 0.xfee00000健康
ACPI: LAPIC (acpi_.id[0x00] lapic_id[0x00] enabl.ed)           鲜花
Pro.cessor #0 6:15 APIC versi.on 20             电子
ACPI: LA.PIC (acpi_id[.0x01] lapic_id[0x04] enabled)           女人
Processor. #4 6:15 APIC version. 20--- 印刷
ACPI: LAPIC (a.cpi_id[0x02.] lapic_id[0x01] enabled).
Processor #1 6:15 APIC v.ers.ion 20.
ACPI: LAPIC (acpi._id[0x03] lapic_id[0x05] enable.d)学习
Processor #5 6:15. APIC. version 20.
ACPI: LAP.IC (acpi._id[0x04] lapic_id[0x02] enabled).
Processor #2 6:15 API..C version 20--- 印刷
ACPI: LAPIC (acp.i_id[0x05] .lapic_id[0x06] enabled).
Proces.sor #6 6:15 .APIC version 20              乙肝
ACPI.: LAPIC. (acpi_id[0x06] lapic_id[0x03] enabled)              乙肝
Processor #3 6:15 .APIC ver.sion 20(        游戏          )
ACPI: LAPIC (acpi_id[0x07] lap.ic_id[0x.07] enabled)    健康
Process.or. #7 6:15 APIC version 20--------------彩票
ACPI: LA.PIC_NMI (acpi_id[0x00] high edge. lint[0x1])<性病>
ACPI: LAPIC_NMI (acpi_.id[0x01] high edge. lint[0x1])           建材
ACPI: LAPIC_NMI (acpi_id.[0x02] high. edge lint[0x1])             电子
ACP.I: LAPIC_NMI (acpi_id[0x03] high edge lint[0x.1])投资
ACPI: LAPI.C._NMI (acpi_id[0x04] high edge lint[0x1]).
ACPI: LAPIC_NMI (acpi_id.[0x05] high edge li.nt[0x1])电影
ACP.I: LAPIC_NMI (acpi_id[0x06] high edge l.int[0x1])           鲜花
ACPI: LAPIC_NMI (acpi_id[0x07] h.igh edge lint.[0x1])           女人
Enabling APIC mode:  Flat.  Using. 0 I/O AP.ICs.
ACP.I:. IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])    美容
IOAPIC[0]: a.pic_id 8, version 32, address 0xfec00000,. GSI 0-23健康
ACPI: I.OAPIC .(id[0x09] address[0xfec80000] gsi_base[24])             汽车
IOAPIC[1].: apic_id 9, version 32, address 0xf.ec80000, GSI 24-47--- 印刷
ACPI: INT_SRC_OVR (bus 0 b.us_irq 0 g.lobal_irq 2 high edge)学习
ACPI: IN.T_SRC_OVR (bus 0 bus_irq 9 glob.al_irq 9 high level)教育
ACPI: IRQ0 u.sed .by override.电影
ACPI: IRQ.2 used by overrid.e.    外汇
ACPI: IRQ9 used by ..override.            杀毒
Using ACPI (MADT) for .S.MP configuration information域名
Allocating PCI resources starting at .d1000000 (gap: d0000.000:10000000)健康
Built 1 zonelis.ts[成人用品]
Kernel command line.: ro root.=LABEL=/
mapped A..PIC to ffffd000 (fee00000)电影
Initializin.g CPU#0域名
CP.U 0 irqstacks, hard=.c03ee000 soft=c03ce000.
PID hash table entries:. 40.96 (order: 12, 65536 bytes).
D.etected 2000.270 MHz proces.sor.            杀毒
Using pmtmr for high-res timesour..ce虚拟主机
Console: c..olour VGA+ 80x25健康
Dentry cache hash table .entries: 131072 (order: 7, 524288 byt.es)[成人用品]
Inode-cache hash table entries:. 65536 (order: 6, 2621.44 bytes)<性病>
Memo.ry: 8308952k/9175040k avail.able (1876k kerne.l code, 77984k reserved, 759k data, 184k init, 7470464k highmem)教育
Calibra.ting delay using. timer specific rou.tine.. 4003.11 BogoMIPS (lpj=2001556)服务器
Security Scaffold v.1.0..0 initialized投资
SELinux:  I.nitializing.--- 印刷
SELinux:  Start.i.ng in permissive mode外贸
There is already a security fram.ework initialized, register_sec.uri.ty failed..
selinux_register_security:  Regi.stering secondary module capabi.lity.
Capability LSM initia.lized as second.ary教育
M.ount-cache hash table entries: 512 (order: 0, 4096 bytes.)    健康
CPU: After generi.c identify, caps.: bfebfbff 20100000 00000000 00000000域名
CPU: After vendor identif.y, caps:  b.febfbff 20100000 00000000 00000000.
monito.r/mw.ait feature present.学习
using mwait .i.n idle threads.             汽车
CPU: L1 I cache: 32K, L1. D ca.che: 32K    外汇
CPU: L2. cache: 4096K.
CPU0: Physical Pr.oces.sor ID: 0[成人用品]
CP.U0: Processor C.ore ID: 0--------------彩票
CPU0: .Initial APIC ID: 0.
C.PU: After all inits, caps:        bfebfbff 20100000 00000000 000000.40--- 印刷
Intel machine check ..architecture supported..
Intel .machin.e check reporting enabled on CPU#0.           女人
Ena.bling fast FPU save .and restore... done.域名
Enabling unmask.ed SIMD FPU exception support... done...
Checking 'hlt' instruc.t.ion... OK.--- 印刷
CPU0: Intel(R) Xeon(R) CP.U           E5335  .@ 2.00GHz stepping 0b              乙肝
per-CP.U timeslice cu.toff: 5566.44 usecs.             汽车
task mi.gration c.ache decay timeout: 6 msecs.(        游戏          )
Booting proce.ssor 1/1 eip .3000    健康
C.PU 1 irqstacks., hard=c03ef000 soft=c03cf000教育
Initializing. CPU#1
Calibr.ating delay using timer specific routine.. 3999.60 BogoM..IPS (lpj=1999802)              乙肝
CPU: Af.ter generic identify, caps: bfebfbff 20100000 0000000.0 00000000.
CPU: After vendor identify, caps:  bfebfbff 20100000 000.00000 00000000.             电子
monitor/mwait fea.ture presen.t.教育
CPU: L1 .I cache: 3.2K, L1 D cache: 32K.
C.PU: L2 cache: 4096K.
CPU1: Physical Pro.cessor ID: .0虚拟主机
C..PU1: Processor Core ID: 1电影
CPU1: In.itial APIC ID: 1.
CPU: After all inits, caps:        bfebfbff .20100000 00000000. 00000040域名
Intel machine check architecture s.upp.orted.             电子
Intel machine ch.eck reporting enabled on CPU#1..             汽车
CPU1: Intel(R) .Xeon(R) CPU           E5335  .@ 2.00GHz stepping 0b.
Booting processor. .2/2 eip 3000.
CPU 2. irqstacks, hard=c03f0000 .soft=c03d0000投资
Initial.izing CPU#2.
Calibrating delay using timer specific. r.ou.tine.. 3999.57 BogoMIPS (lpj=1999789)           鲜花
CPU: After gener.ic identify, .caps: bfebfbff 20100000 00000000 00000000教育
CPU: After vendor identify, c.aps:  b.febfbff 20100000 00000000 00000000虚拟主机
mon.itor/mwait. feature present.(广告)
CPU: L1 I cac.he: 32K, L1 .D cache: 32K外贸
CPU:. L2 cache: 4096K.
CPU2: Phys.ic.al Processor ID: 0--------------彩票
CPU2.: Processor Core I.D: 2<性病>
CPU2: Initial APIC ID: .2.
CPU: After .all inits, caps.:        bfebfbff 20100000 00000000 00000040电影
Intel machine .check archit.ecture supported.--- 印刷
Intel machine check re.porting enabl.ed on CPU#2.           鲜花
CPU2: Intel(R) Xeon(R.) CPU           E5335  @. 2.00GHz stepping 0b电影
Booting proce.ssor 3/.3 eip 3000.
CPU 3 irqstack.s, hard=c03f1000 soft=c03d1.000.
Initial.izing CPU#3.
Calibrat.ing delay using timer specific routine.. 3999.59 BogoMIPS (lp.j=199979.5)虚拟主机
CPU: After generi.c identify, caps: bfebfbff 20100000 00000000 0.0000000           女人
CPU: After vendor identify, caps:  bfebfbff 20100000 00.000000. 00000000          婚庆
mo.nitor/mwait feature pres.ent.           鲜花
C.PU: L1 I cache: 32K,. L1 D cache: 32K--- 印刷
CPU.: L2 cache: 4096K    美容
CPU3: Physical Proce.ssor ID: 0.电影
CPU3.: Process.or Core ID: 3电脑
CPU3: Initial AP.IC ID: 3             汽车
CPU: After all in.its, caps:    .    bfebfbff 20100000 00000000 00000040--------------彩票
Intel machine check arc.hit.ecture supported.虚拟主机
Intel machine check r.e.porting enabled on CPU#3.    健康
CPU3: Intel(R) Xeon(R) CPU           E5335  @ 2.00GHz s.tepping 0.b    外汇
Booting proc.es.sor 4/4 eip 3000学习
CPU 4 i.rqstacks, hard=c03f2000 soft.=c03d2000[成人用品]
Initializing CPU.#4电影
Calibrating delay using timer specific routine.. 3999..6.4 BogoMIPS (.lpj=1999823)            杀毒
CPU: After generic .identify, caps: .bfebfbff 20100000 00000000 00000000            杀毒
CPU: After. ven.dor identify, caps:  bfebfbff 20100000 00000000 00000000教育
monitor/mwait feat.ur.e present.           鲜花
CPU: L1 I cache: 32K, L1 D ca.che: 3.2K           女人
CPU: L2 cache: .4096K(        游戏          )
CPU4: Physical .Proc.essor ID: 1.
CP.U4: Processor Core I.D: 4服务器
CPU4: Init.ial APIC ID: 4.
CPU: After a.ll inits, caps:        bfebfbff 2010000.0 00000000 00000040             汽车
Intel mac.h.ine check architecture supported.外贸
Int.el machine check reporting enabled on C.PU#4..
CPU4: Intel(R) Xeon(R) CPU  ..         E5335  @ 2.00GHz stepping 0b.
Booting processor 5./5. eip 3000学习
CPU 5 irqsta.cks, hard=c03f3000 soft=c03.d3000健康
Initializ.ing CPU#5.
Calibrating delay using timer specific routine.. 3999.65 BogoMIPS (lpj=199982http://upload.bbs.csuboy.com/Mon_1004/126_6973_31ffde71d54d97a.gif[/img].
C.PU: After generic ide.ntify, caps: bfebfbff 20100000 00000000 00000000    美容
CPU: After vendor i.dentify, c.aps:  bfebfbff 20100000 00000000 00000000.
monitor./mwait featur.e present.外贸
CPU: L1 I cache: 32K, L1 D cac.he: 32.K            杀毒
CPU: L2 .cache: 4096K服务器
CP.U5: .Physical Processor ID: 1.
CPU5: Proce.ssor Core ID: .5服务器
CPU5: Initial APIC .ID: 5<性病>
CPU: After all inits, caps:  .      bfebfbff 20100000 00000000 0000004.0.
Intel machine check archi.tec.ture supported..
Intel machi.ne. check reporting enabled on CPU#5.域名
CPU5: Intel(R) Xeon(R) CPU .          E5335  @ 2.00GHz step.ping 0b电脑
Boo.t.ing processor 6/6 eip 3000(广告)
CPU. 6 irqstacks, har.d=c03f4000 soft=c03d4000.
Initializin.g CPU#6           建材
Calibrating del.ay using timer specific. .routine.. 3999.61 BogoMIPS (lpj=1999806)--- 印刷
CP.U: After generic ident.ify, caps: bfebfbff 20100000 00000000 00000000电影
CPU: Afte.r vendor identify, caps:  bfebfbff 20100000 000000.00 00000000教育
monitor./mwait feature prese.nt.    健康
CPU:. L1 I ca.che: 32K, L1 D cache: 32K外贸
CPU:. L2 cache: 4096K[成人用品]
CPU6: Physical Proc..essor ID: 1              乙肝
CPU6: Processor Core ID.: .6            杀毒
CPU.6: Initial APIC ID: 6电脑
CPU: After a..ll inits, caps:        bfebfbff 20100000 00000000 00000040           建材
Intel machin.e check architecture sup.ported.            杀毒
Inte.l machine check reporting enabl.ed on CPU#6.投资
CPU6: Intel(R) X.eon(R) CPU           E5335  @ .2.00GHz stepping 0b学习
Booting pr.ocessor 7/7 eip 3.000虚拟主机
CPU 7 irqstacks, hard=c..03f5000 soft=c03d5000.
Initializing C.PU#7.
Calibrating delay using timer specific routine.. 3999.60 Bo.g.oMIPS (lpj=.1999804)--------------彩票
CPU: After generic .identify, caps: bfebfb.ff 20100000 00000000 00000000--------------彩票
CPU:. After vendor .identify, caps:  bfebfbff 20100000 00000000 00000000教育
monitor/mwait f.ea.ture present.          婚庆
CPU: L1 I cache: 32K., L1 D cache.: 32K.
CPU:. L2 cache: 4096K    外汇
CPU7: Physical P.rocessor ID:. 1    健康
CPU7.: Processor Core ID.: 7           女人
CPU7: .Initial APIC ID: 7.
CPU: After all inits,. caps:        bfebfbff 20100000 00000000 0000.0040域名
I.ntel machine check architecture .supported.外贸
Inte.l m.achine check reporting enabled on CPU#7..
CPU7: Intel(R). Xeon.(R) CPU           E5335  @ 2.00GHz stepping 0b<性病>
Total of 8 processors. activated (32.000.40 BogoMIPS).服务器
ENABLING IO-APIC IR.Qs
..TI.MER: vecto.r=0x31 pin1=2 pin2=-1.
checking TSC synchron.i.zation across 8 CPUs: passed.(广告)
Brough.t up 8 CPUs             电子
zapping low. mappings.    健康
checking. if image is .initramfs... it is.
F.reeing initrd memory: 48.3k freed           女人
NET: R.egistered protocol family 1.6教育
PCI: PCI BIOS re.vision 2.10 entry a.t 0xfd7d9, last bus=6健康
PCI:. Using MMCONFIG.
mtrr: v.2.0 (20020519)            杀毒
ACPI: .Subsystem revision 2004081.6              乙肝
ACPI: Interpret.er enabled<性病>
A.CPI: Using IO.APIC for interrupt routing             汽车
A.CPI: PCI R.oot Bridge [PCI0] (00:00).
PCI: Probing PCI hardware (bus. 00).              乙肝
PCI: Ignoring. B.AR0-3 of IDE controller 0000:00:1f.1.
PCI: Transparent br.idge - 0000:.00:1e.0--- 印刷
ACPI: PCI Interru.pt Routing Table [\_SB_.PCI0._PR.T](        游戏          )
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P.0P2._PRT].外贸
ACPI: PCI Interrup.t Routing Table [\_SB_..PCI0.P0P2.BMD0._PRT]<性病>
ACPI: PCI Interrupt Routing .Table. [\_SB_.PCI0.P0P2.BMD0.BPD0._PRT].
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0..BPD2.._PRT].
ACPI.: PCI Interrupt Routing Table [\_SB._.PCI0.PCIB._PRT]            杀毒
ACPI: PCI Int.err.upt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15)    健康
A.CPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 .11 14 15)           鲜花
ACPI: PCI Interrupt Link [LNKC] (I.RQs 3 4. 5 6 *7 10 11 14 15)            杀毒
ACPI: PCI Interrupt Link [LNKD] (IRQs. 3 4 5 6. 7 *10 11 14 15)学习
ACPI: PCI Interrupt Li.nk [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, di.sabled.投资
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *.0, dis.abled.(        游戏          )
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4.. 5 6 7 10 11 14 15) *0, disabled.<性病>
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 .15) *0, di.sabled.学习
Linux Plug and Play Supp.ort v.0.97 (c) Adam Belay.
usbcore: regi.stered new dri.ver usbfs             汽车
us.b.core: registered new driver hub--- 印刷
PCI: Using ACPI for IR.Q rout.ing学习
ACPI: PCI i.nterrupt 0000.:00:00.0[A] -> GSI 16 (level, low) -> IRQ 169.
AC.PI: .PCI interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169           建材
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI. 16 .(level, low) -> IRQ 169外贸
ACPI: PCI interrupt 0000:00:1d.0[A] .-> GSI 17 (level, low) .-> IRQ 177           建材
ACPI: PCI. interrupt 0000.:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
AC.PI: PCI interrupt 0000:00:.1d.7[A] -> GSI 17 (level, low) -> IRQ 177(广告)
ACPI: PCI interrupt 0000.:00:1f.1[A] -> GSI 18 (level, .low) -> IRQ 193外贸
ACPI: PCI interrupt 0000:00:.1f.2[B] -> GSI 19. (level, low) -> IRQ 185.
ACPI: PCI interrupt 000.0:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 18.5虚拟主机
ACPI: PCI. interrupt 0000:01:00.0[A] -> GSI. 16 (level, low) -> IRQ 169           女人
ACPI: PCI interrupt 0.000:02:00.0[A] -.> GSI 16 (level, low) -> IRQ 169.
ACPI: P..CI interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 193<性病>
ACPI: PCI in.terrupt 0000:04:00.0[A] -.> GSI 18 (level, low) -> IRQ 193电脑
ACPI: PCI .interrupt 0000:04:00.1[B] -> GSI 19 (level,. low) -> IRQ 185域名
Simple .Boot. Flag at 0x36 set to 0x1.
apm: BIOS not f.ound.    健康
audit: initializing n.etlin.k socket (disabled)服务器
audit.(1203268192.204:1): ini.tialized           建材
highmem bounce pool size.: 64 pages.<性病>
Total HugeTLB memory a.lloca.ted, 0(广告)
V.FS:. Disk quotas dquot_6.5.1             汽车
Dquot-cache hash table entries: 1024 (.order 0, 4096 byte.s)学习
SELinux:  Re.gistering netfilte.r hooks<性病>
Initializing Cryptogr.aph.ic API             汽车
ksign: I.nstalling public key .data(广告)
Load.ing keyring<性病>
- Adde.d public. key 8301CD821788A86B<性病>
- User ID: Red Hat, Inc.. (Kernel Module G.PG key)           建材
pci_.hotplug: PC.I Hot Plug PCI Core version: 0.5.
ACPI: Processor [CPU0] (sup.ports C1, 8 throttling st.ates)    外汇
ACPI: Processor. [CPU1] (suppor.ts C1, 8 throttling states)电脑
A.CPI: Pro.cessor [CPU2] (supports C1, 8 throttling states)虚拟主机
ACPI: .Processor [CPU3] (supports C1, 8 throttling .states)    健康
ACPI: Processor [CPU4] .(supports C1, 8 throttling stat.es)电脑
ACPI: Processor [CPU5] (s.upports .C1, 8 throttling states).
ACPI: Processor [CP.U6] (supports C1., 8 throttling states)电脑
ACPI: P.rocessor [CP.U7] (supports C1, 8 throttling states)电脑
Real .Time Clock Driver v1.1.2(        游戏          )
Linux agpgart int.erface. v0.100 (c) Dave Jones[成人用品]
serio: i8042 AUX port .at 0x60,0x64 .irq 12投资
serio.: i8042 KB.D port at 0x60,0x64 irq 1
Serial: 8250/1655.0 driver $Revision: 1.90 $ 8 ports, IRQ sh.aring enabled(广告)
ttyS0 at I/O .0x3f8 (irq = 4.) is a 16550A    健康
ttyS1 at I/O 0x2f8 (irq = 3) is a 1.655.0A<性病>
R.AMDISK driver initi.alized: 16 RAM disks of 16384K size 1024 blocksize(        游戏          )
divert: not allocating divert_.blk for non-ethernet. device lo--- 印刷
Uniform Mult.i-Platform E-IDE driver Rev.ision: 7.00alpha2.
ide: Assuming 33MHz syste.m bus speed for PIO mode.s; override with idebus=xx            杀毒
E.SB2: IDE controller at PCI slot 0000:00:1.f.1投资
ACPI: PCI interrupt 0000:00:1f.1.[A] -> GSI 18 (.level, low) -> IRQ 193.
ESB2: chipset revision. 9(        游戏          )
ESB2: not 100% native mode: .will probe irq.s later--------------彩票
    ide0: BM-DMA at 0x1840-0x1847, BIOS settings: hdaMA, hdb:piohttp://upload.bbs.csuboy.com/Mon_1004/126_6973_3b01f95722f71e9.gif[/img]    健康
Prob.ing IDE interf.ace ide0...--------------彩票
hda: CD-224E, ATAP.I CD/DVD-ROM driv.e.
Usin.g cfq io scheduler    健康
ide0 at. 0x1f0-0x1f7,0x3f.6 on irq 14--- 印刷
Probing IDE interf.ace ide1....服务器
Pro.bing IDE in.terface ide2...(        游戏          )
Probing .IDE interface ide.3...学习
Pr.obing IDE .interface ide4...           建材
Probing .IDE .interface ide5...(        游戏          )
hda: ATAP.I 24X CD-ROM drive, 128kB Cache,. UDMA(33).
Unif.orm CD-ROM driver R.evision: 3.20             汽车
ide.-floppy driver 0..99.newide    美容
usbcore: registered. new driver hiddev.    外汇
usbc.ore: registered new drive.r usbhid
drivers/usb/input/hid-core.c: v2..0.:USB HID core driver           女人
mic.e: PS/2 mouse device common for al.l mice投资
md: m.d dr.iver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27    外汇
NET: Regi.stered protoc.ol family 2.
I.P route cache hash table entries: 524288 (order: 9, 2097152. bytes).
TCP established hash tab.le entri.es: 262144 (order: 10, 4194304 bytes).
TCP bind hash .table entries: 2.62144 (order: 9, 3145728 bytes)           建材
TCP: Ha.sh tables configured (established 262144 bind 26.2144)电影
Initi.alizing IPsec netlink sock.et           建材

NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
ACPI wakeup devices:
BPD0 BPD2 USB1 USB2 EUSB PCIB KBC0 MSE0 COM1 COM2
Freeing unused kernel memory: 184k freed
SCSI subsystem initialized
libata version 1.20 loaded.
ata_piix 0000:00:1f.2: version 1.05
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
PCI: Enabling device 0000:00:1f.2 (0005 -> 0007)
ACPI: PCI interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1870 ctl 0x1866 bmdma 0x1850 irq 185
ata2: SATA max UDMA/133 cmd 0x1868 ctl 0x1862 bmdma 0x1858 irq 185
ata1: dev 0 cfg 49:2f00 82:346b 83:7d09 84:5923 85:3469 86:3c09 87:4123 88:207f
ata1: dev 0 ATA-7, max UDMA/133, 976773168 sectors: LBA48
ata1: dev 0 configured for UDMA/133
scsi0 : ata_piix
ata2: dev 0 cfg 49:2f00 82:346b 83:7d09 84:5923 85:3469 86:3c09 87:4023 88:207f
ata2: dev 0 ATA-7, max UDMA/133, 976773168 sectors: LBA48
ata2: dev 0 configured for UDMA/133
scsi1 : ata_piix
  Vendor: ATA       Model: ST3500630NS       Rev: 3.AE
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
  Vendor: ATA       Model: ST3500630NS       Rev: 3.AE
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
inserting floppy driver for 2.6.9-42.ELsmp
FDC 0 is a post-1991 82077
Intel(R) PRO/1000 Network Driver - version 7.0.33-k2-NAPI
Copyright (c) 1999-2005 Intel Corporation.
ACPI: PCI interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:04:00.0 to 64
e1000: 0000:04:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:30:48:5f:18:e8
divert: allocating divert_blk for eth0
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI interrupt 0000:04:00.1[B] -> GSI 19 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:04:00.1 to 64
e1000: 0000:04:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:30:48:5f:18:e9
divert: allocating divert_blk for eth1
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
hw_random: RNG not detected
ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 17 (level, low) -> IRQ 177
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 177, pci mem f881e000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 17 (level, low) -> IRQ 177
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 177, io base 00001800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 185, io base 00001820
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ACPI: Power Button (FF) [PWRF]
EXT3 FS on sda2, internal journal
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: devel@redhat.com[/email]
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
cdrom: open failed.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 4200956k swap on /dev/sdb1.  Priority:-1 extents:1
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
microcode: No new microdata for cpu 1
microcode: No new microdata for cpu 2
microcode: No new microdata for cpu 4
microcode: No new microdata for cpu 5
microcode: No new microdata for cpu 7
microcode: No new microdata for cpu 6
microcode: No new microdata for cpu 0
microcode: No new microdata for cpu 3
IA-32 Microcode Update Driver v1.14 unregistered
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
MSI INIT SUCCESS
e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
e1000: eth0: e1000_watchdog_task: 10/100 speed: disabling TSO
ip_tables: (C) 2000-2002 Netfilter core team
e1000: eth1: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
e1000: eth1: e1000_watchdog_task: 10/100 speed: disabling TSO
i2c /dev entries driver
lp: driver loaded but no devices found
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0344160(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
eth1: no IPv6 routers present
eth0: no IPv6 routers present
[root@XX ~]# dmesg |grep e1000
e1000: 0000:04:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:30:48:5f:18:e8
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: 0000:04:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:30:48:5f:18:e9
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
e1000: eth0: e1000_watchdog_task: 10/100 speed: disabling TSO
e1000: eth1: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
e1000: eth1: e1000_watchdog_task: 10/100 speed: disabling TSO
[root@XX ~]# dmesg |grep eth
divert: not allocating divert_blk for non-ethernet device lo
divert: allocating divert_blk for eth0
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
divert: allocating divert_blk for eth1
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
e1000: eth0: e1000_watchdog_task: 10/100 speed: disabling TSO
e1000: eth1: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
e1000: eth1: e1000_watchdog_task: 10/100 speed: disabling TSO
divert: not allocating divert_blk for non-ethernet device sit0
eth1: no IPv6 routers present
eth0: no IPv6 routers present


###############
测试服务器
###############
[root@测试服务器~]# dmesg |grep eth
divert: not allocating divert_blk for non-ethernet device lo
divert: allocating divert_blk for eth0
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
divert: allocating divert_blk for eth1
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
e1000: eth0: e1000_watchdog_task: 10/100 speed: disabling TSO
e1000: eth1: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
e1000: eth1: e1000_watchdog_task: 10/100 speed: disabling TSO
divert: not allocating divert_blk for non-ethernet device sit0
eth1: no IPv6 routers present
eth0: no IPv6 routers present
[root@测试服务器 ~]# dmesg |grep e1000
e1000: 0000:04:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:1d:60:c7:c7:b6
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: 0000:04:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:1d:60:c7:c7:b7
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
e1000: eth0: e1000_watchdog_task: 10/100 speed: disabling TSO
e1000: eth1: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
e1000: eth1: e1000_watchdog_task: 10/100 speed: disabling TSO

[root@测试服务器 ~]# dmesg
Linux version 2.6.9-42.ELsmp (bhcompile@hs20-bc1-1.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-2)) #1 SMP Wed Jul 12 23:27:17 EDT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bff00000 (usable)
BIOS-e820: 00000000bff00000 - 00000000bff0f000 (ACPI data)
BIOS-e820: 00000000bff0f000 - 00000000bff80000 (ACPI NVS)
BIOS-e820: 00000000bff80000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
4224MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f6320
NX (Execute Disable) protection: active
On node 0 totalpages: 1310720
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 225280 pages, LIFO batch:16
  HighMem zone: 1081344 pages, LIFO batch:16
DMI present.
Using APIC driver default
ACPI: RSDP (v002 PTLTD                                 ) @ 0x000f62f0
ACPI: XSDT (v001 PTLTD           XSDT   0x06040000  LTP 0x00000000) @ 0xbff0904b
ACPI: FADT (v003 INTEL  TUMWATER 0x06040000 PTL  0x00000003) @ 0xbff0eced
ACPI: MADT (v001 PTLTD           APIC   0x06040000  LTP 0x00000000) @ 0xbff0ee55
ACPI: MCFG (v001 PTLTD    MCFG   0x06040000  LTP 0x00000000) @ 0xbff0ef1d
ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0xbff0ef59
ACPI: ASF! (v032 OEMID  OEMTBL   0x06040000 PTL  0x00000001) @ 0xbff0ef81
ACPI: DSDT (v001  Intel BLAKFORD 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
Processor #4 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
Processor #5 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
Processor #2 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled)
Processor #6 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
Processor #3 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
Processor #7 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
Enabling APIC mode:  Flat.  Using 0 I/O APICs
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/
mapped APIC to ffffd000 (fee00000)
Initializing CPU#0
CPU 0 irqstacks, hard=c03ee000 soft=c03ce000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1596.355 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 4145108k/5242880k available (1876k kernel code, 47144k reserved, 759k data, 184k init, 3275776k highmem)
Calibrating delay using timer specific routine.. 3194.56 BogoMIPS (lpj=1597284)
Security Scaffold v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
CPU: After vendor identify, caps:  bfebfbff 20100000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU0: Physical Processor ID: 0
CPU0: Processor Core ID: 0
CPU0: Initial APIC ID: 0
CPU: After all inits, caps:        bfebfbff 20100000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Xeon(R) CPU           E5310  @ 1.60GHz stepping 0b
per-CPU timeslice cutoff: 4009.59 usecs.

task migration cache decay timeout: 5 msecs.
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c03ef000 soft=c03cf000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3191.57 BogoMIPS (lpj=1595787)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
CPU: After vendor identify, caps:  bfebfbff 20100000 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU1: Physical Processor ID: 0
CPU1: Processor Core ID: 1
CPU1: Initial APIC ID: 1
CPU: After all inits, caps:        bfebfbff 20100000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Xeon(R) CPU           E5310  @ 1.60GHz stepping 0b
Booting processor 2/2 eip 3000
CPU 2 irqstacks, hard=c03f0000 soft=c03d0000
Initializing CPU#2
Calibrating delay using timer specific routine.. 3191.59 BogoMIPS (lpj=1595796)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
CPU: After vendor identify, caps:  bfebfbff 20100000 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU2: Physical Processor ID: 0
CPU2: Processor Core ID: 2
CPU2: Initial APIC ID: 2
CPU: After all inits, caps:        bfebfbff 20100000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel(R) Xeon(R) CPU           E5310  @ 1.60GHz stepping 0b
Booting processor 3/3 eip 3000
CPU 3 irqstacks, hard=c03f1000 soft=c03d1000
Initializing CPU#3
Calibrating delay using timer specific routine.. 3191.59 BogoMIPS (lpj=1595797)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
CPU: After vendor identify, caps:  bfebfbff 20100000 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU3: Physical Processor ID: 0
CPU3: Processor Core ID: 3
CPU3: Initial APIC ID: 3
CPU: After all inits, caps:        bfebfbff 20100000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel(R) Xeon(R) CPU           E5310  @ 1.60GHz stepping 0b
Booting processor 4/4 eip 3000
CPU 4 irqstacks, hard=c03f2000 soft=c03d2000
Initializing CPU#4
Calibrating delay using timer specific routine.. 3191.60 BogoMIPS (lpj=1595802)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
CPU: After vendor identify, caps:  bfebfbff 20100000 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU4: Physical Processor ID: 1
CPU4: Processor Core ID: 4
CPU4: Initial APIC ID: 4
CPU: After all inits, caps:        bfebfbff 20100000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#4.
CPU4: Intel(R) Xeon(R) CPU           E5310  @ 1.60GHz stepping 0b
Booting processor 5/5 eip 3000
CPU 5 irqstacks, hard=c03f3000 soft=c03d3000
Initializing CPU#5
Calibrating delay using timer specific routine.. 3191.60 BogoMIPS (lpj=1595804)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
CPU: After vendor identify, caps:  bfebfbff 20100000 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU5: Physical Processor ID: 1
CPU5: Processor Core ID: 5
CPU5: Initial APIC ID: 5
CPU: After all inits, caps:        bfebfbff 20100000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#5.
CPU5: Intel(R) Xeon(R) CPU           E5310  @ 1.60GHz stepping 0b
Booting processor 6/6 eip 3000
CPU 6 irqstacks, hard=c03f4000 soft=c03d4000
Initializing CPU#6
Calibrating delay using timer specific routine.. 3191.60 BogoMIPS (lpj=1595804)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
CPU: After vendor identify, caps:  bfebfbff 20100000 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU6: Physical Processor ID: 1
CPU6: Processor Core ID: 6
CPU6: Initial APIC ID: 6
CPU: After all inits, caps:        bfebfbff 20100000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#6.
CPU6: Intel(R) Xeon(R) CPU           E5310  @ 1.60GHz stepping 0b
Booting processor 7/7 eip 3000
CPU 7 irqstacks, hard=c03f5000 soft=c03d5000
Initializing CPU#7
Calibrating delay using timer specific routine.. 3191.61 BogoMIPS (lpj=1595806)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
CPU: After vendor identify, caps:  bfebfbff 20100000 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU7: Physical Processor ID: 1
CPU7: Processor Core ID: 7
CPU7: Initial APIC ID: 7
CPU: After all inits, caps:        bfebfbff 20100000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#7.
CPU7: Intel(R) Xeon(R) CPU           E5310  @ 1.60GHz stepping 0b
Total of 8 processors activated (25535.76 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 8 CPUs: passed.
Brought up 8 CPUs
zapping low mappings.
checking if image is initramfs... it is
Freeing initrd memory: 482k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd524, last bus=8
PCI: Using MMCONFIG
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0.BPD0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0.BPD2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMF3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 14 15) *9
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 17 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 17 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:04:00.1[B] -> GSI 19 (level, low) -> IRQ 185
Simple Boot Flag at 0x40 set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
audit(1203385947.822:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 8301CD821788A86B
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1, 8 throttling states)
ACPI: Processor [CPU1] (supports C1, 8 throttling states)
ACPI: Processor [CPU2] (supports C1, 8 throttling states)
ACPI: Processor [CPU3] (supports C1, 8 throttling states)
ACPI: Processor [CPU4] (supports C1, 8 throttling states)
ACPI: Processor [CPU5] (supports C1, 8 throttling states)
ACPI: Processor [CPU6] (supports C1, 8 throttling states)
ACPI: Processor [CPU7] (supports C1, 8 throttling states)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ESB2: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 193
ESB2: chipset revision 9
ESB2: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hdaMA, hdb:pio
Probing IDE interface ide0...
hda: CD-224E, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 262144 (order: 9, 3145728 bytes)
TCP: Hash tables configured (established 262144 bind 262144)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
ACPI wakeup devices:
P0P2 BPD0 BPD1 BPD2 BMF3 P0P3 P0P4 P0P6 P0P7 PEX0 PEX1 PEX2 PEX3 USB1 USB2 USB3 USB4 EUSB PCIB KBC0 COM1 COM2 AC97
Freeing unused kernel memory: 184k freed
SCSI subsystem initialized
libata version 1.20 loaded.
ata_piix 0000:00:1f.2: version 1.05
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
PCI: Enabling device 0000:00:1f.2 (0005 -> 0007)
ACPI: PCI interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x18C8 ctl 0x18AE bmdma 0x18B0 irq 185
ata2: SATA max UDMA/133 cmd 0x18C0 ctl 0x18AA bmdma 0x18B8 irq 185
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:207f
ata1: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48
ata1: dev 0 configured for UDMA/133
scsi0 : ata_piix
ata2: SATA port has no device.
scsi1 : ata_piix
  Vendor: ATA       Model: ST3250820AS       Rev: 3.AA
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
inserting floppy driver for 2.6.9-42.ELsmp
FDC 0 is a post-1991 82077
Intel(R) PRO/1000 Network Driver - version 7.0.33-k2-NAPI
Copyright (c) 1999-2005 Intel Corporation.
ACPI: PCI interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:04:00.0 to 64
e1000: 0000:04:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:1d:60:c7:c7:b6
divert: allocating divert_blk for eth0
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI interrupt 0000:04:00.1[B] -> GSI 19 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:04:00.1 to 64
e1000: 0000:04:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:1d:60:c7:c7:b7
divert: allocating divert_blk for eth1
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
hw_random: RNG not detected
ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 17 (level, low) -> IRQ 177
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 177, pci mem f881e000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 17 (level, low) -> IRQ 177
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 177, io base 00001800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 185, io base 00001820
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 193, io base 00001840
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
uhci_hcd 0000:00:1d.3: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: irq 169, io base 00001860
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ACPI: Power Button (FF) [PWRF]
EXT3 FS on sda2, internal journal
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
cdrom: open failed.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2096440k swap on /dev/sda5.  Priority:-1 extents:1
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
MSI INIT SUCCESS
e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
e1000: eth0: e1000_watchdog_task: 10/100 speed: disabling TSO
ip_tables: (C) 2000-2002 Netfilter core team
e1000: eth1: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
e1000: eth1: e1000_watchdog_task: 10/100 speed: disabling TSO
i2c /dev entries driver
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0344160(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
eth1: no IPv6 routers present
eth0: no IPv6 routers present

关于双网卡在同一个网段的互通问题，在前面有帖子讨论过了，很详细。

至于为何不通的原因，也详细的讨论过了，你搜搜吧。

如果想提高带宽或者提供冗余的话解决方法就是双网卡bond。想双IP提供不同服务的话，可以bond后配置辅助IP来解决。

楼主的现象和我的类似.
不过我是一台机器上2个网卡,分别在2个网段,跟楼主的现象很像.

[root@F8-602 ~]# arping 192.168.3.172
ARPING 192.168.3.172 from 192.168.3.248 eth0
Unicast reply from 192.168.3.172 [00:0C:29:8F:0D:72]  12.604ms
Unicast reply from 192.168.3.172 [00:0C:29:8F:0D:68]  12.833ms
Unicast reply from 192.168.3.172 [00:0C:29:8F:0D:68]  1.022ms
Unicast reply from 192.168.3.172 [00:0C:29:8F:0D:68]  0.975ms
Unicast reply from 192.168.3.172 [00:0C:29:8F:0D:68]  0.952ms

[3]+  Stopped                 arping 192.168.3.172
[root@F8-602 ~]# arping 192.168.9.14
ARPING 192.168.9.14 from 192.168.3.248 eth0
Unicast reply from 192.168.9.14 [00:0C:29:8F:0D:72]  1.107ms
Unicast reply from 192.168.9.14 [00:0C:29:8F:0D:68]  1.365ms
Unicast reply from 192.168.9.14 [00:0C:29:8F:0D:68]  1.055ms
Unicast reply from 192.168.9.14 [00:0C:29:8F:0D:68]  3.023ms

[4]+  Stopped                 arping 192.168.9.14

一台UNIX/Linux主机，两块网卡，不能设置同一网段的IP。

你两个网卡都设置相同的网络，当然会有这个问题了，
你的默认路由信息引发问题 呵呵